RAID 5 RECOVERY
We offer a free evaluation and no data-no fee policy for risk-free service Our 24/7 service allows us to recover your lost RAID data fast! We have over 18 years of experience recovering failed RAID arrays We have a 96% success rate recovering failed RAID arrays We provide RAID recovery for any operating system or platform We recover data from all RAID levels (0, 1, 5, 6, 10, 50 & more)
THE RAID RECOVERY PROCESS
Contact ReWave toll-free at 866-739-2835 or click here to submit a form for a free price quote.  We are available 24/7 for your RAID recovery needs.       A data recovery technician will assist you with a free price quote and instructions to receive the free evaluation to determine if your data is recoverable. You can bring your RAID drives to one of our labs or ship the drives to us using our shipping instructions.       Upon receipt of your drives, a data recovery engineer will perform the free evaluation.  You will be contacted with the results and given the option to proceed with the recovery of your data.  The actual recovery process will then begin.

HOW DOES RAID 5 WORK?
A RAID 5 array uses a minimum of three disk drives and stripes data and parity information across all of the drives.  A RAID 5 array has the ability to withstand the loss of one drive as the parity information can help reconstruct the data from the failed drive.  The total size of the array is calculated by multiplying the capacity of the smallest drive times the number  of drives, and then subtract the capacity of the smallest drive.  A RAID 5 has a fast read rate, but it tends to write to the drives slowly since it must write one stripe of both data and parity to each drive.  A RAID 5 can be created with hardware or software.  RAID 5 is frequently used in many different types of servers such as file and application servers, intranet servers, email servers and for database applications.  As it is generally fault tolerance and cost efficient, companies are using RAID 5 as their preferred choice. For more information about the devices using RAID 5 technology, click here. The following diagram illustrates a RAID level 5 (striping with parity).
WHAT CAUSES RAID FAILURE?
There can be many reasons for a failed RAID 5.  Listed below are the most common:               Bad Sectors in the Array Missing Partitions   Corrupt Data in the Array Overwritten Files   Corrupt Files in the RAID RAID Backup Failed   RAID Controller Failure Broken RAID 5   Damaged Files in the Array RAID 5 Offline   Deleted Files in the Array RAID Crashed   Failed RAID 5 RAID Firmware Failure   RAID 5 Drive Failed Power Surge   RAID Power Failure Array Will Not Boot   RAID Rebuild Failed MFT Corruption
WHAT TO DO IF YOU EXPERIENCE RAID 5 FAILURE
If you experience problems with your RAID 5 array, please do not attempt to correct the problem yourself.   By taking matters into your own hands, you could overwrite parity data making RAID recovery more difficult.  Please follow the steps below and contact ReWave for assistance at 866-739-2835. Turn off your RAID 5 array immediately.  This ensures that no additional data can be written to the array, which could overwrite the data you are trying to recover.  Document the events that occurred causing RAID 5 failure.  Try to make notes documenting any problems that occurred and efforts that were made to fix the problems.  If you remove the drives from the array, it is important to label the drives with the same order in which they existed in the array. Although not required, this step will save us time during the RAID recovery process. Contact ReWave immediately.  Our data recovery team is available 24/7 to assist you with RAID recovery at 866-739-2835.

 

Data Recovery | RAID Recovery | Desktop Data Recovery | Laptop Recovery | Server Recovery |  Mac Recovery | Linux Recovery | Novell Recovery | Windows Recovery | Outlook PST Recovery | Quickbooks Recovery | RAID 0 Recovery | RAID 1 Recovery | RAID 5 Recovery | RAID 10 Recovery | Locations Served